DEVELOP INEO 6500 DRIVER DOWNLOAD

Control The bundle registration motor M12 rotates in the reverse direction when the main body start signal turns ON and the registration claws move to the standby position in accordance with the paper size [2]. Stopper control 1 Folding mode Transmitting the FNS signal from the main body [1], the saddle stitching stopper motor M18 rotates [2] to move down the saddle stitching stopper to the stopping position in accordance with the paper size. Product name In this manual, each of the products is described as follows: The guide shaft is projected [5] in sync with the paper exit only when the first folded paper for each set is exited and put away immediately to the folding section [6]. Before conveying the second paper, right angle conveyance gate solenoid SD2 turns ON to move the right angle conveyance gate [6] to the right [7].

Uploader: Akisar
Date Added: 11 December 2006
File Size: 23.6 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 49828
Price: Free* [*Free Regsitration Required]

Mechanism The bundle arm assist mechanism is the mechanism to assist the paper conveyance of the bundle arm rotation drive to be conducted without fault. Type Type Saddle stitching unit with fore-edge trimming and multi-folding function B.

When accessing these areas for maintenance, repair, or adjustment, special care should be taken to avoid burns and electric shock. Shift operation During conveying the paper to the main tray edvelop, the crank mechanism [3] shifts the shift movable section [5] including the shift roller [4] approximately 30 mm backward [6] to shift and exit the paper when shift roller motor M2 [2] rotates.

Toner, drums and developer kits for Develop Ineo

M31 starts the returning operation to the home position [5] when the bundle press motor M23 starts releasing the press [4]. This switching is made when the eccentric cam is driven by the 3rd folding release motor M Comments to devslop Manuals Your Name.

The original [4] from the conveyance section is fed around the reverse roller [3] through the paper exit gate [1], and conveyed to the reverse stacker [5] by the reverse gate [7]. Type Type Multi folding multi stapling device B.

  KENSINGTON ORBIT 64226 DRIVER DOWNLOAD

The edge detection is performed at four points edges per mark. Control The bundle registration motor M12 rotates in the reverse direction when the main body start signal turns ON and the registration claws move to the standby position in accordance with the paper size [2].

Job partition plate In stacker tray sort mode, the trailing edge of the shift paper is restricted by the job dfvelop plate and the paper is exited onto the stacker tray 20 mm shifted from the non-shift paper.

Machine service life Same as the main body. The 1st sheet of paper turns ON SD4 a specified period of time after the punch registration sensor PS6 turns ON, and makes the switch to the inner path. Coupling exit Conveys paper to the succeeding device without any process. Functions Auto sheet feeding online Feeds the sheet to FS automatically under the instruction from the main body.

Develop ineo+ Manuals

At the same time, the punch motor M [3] rotates in the direction according to the number of punched holes. Thus the paper is pressed against the entrance roller forming a loop to correct the ineeo.

Some of the product illustrations contain optional accessories. Page 68 Theory of Operation Ver1. All specifications refer to A4-size paper of 80 gsm quality.

Page 66 Inro of Operation Ver1. Food and Drug Admin- istration implemented regulations for laser products manufactured since August 1, At this time, the shift unit has been moved to the position specified in advance for each paper size.

Develop Ineo Series

Got 650, continue to print. The guide shaft is projected [5] in sync with the paper exit only when the first folded paper for each set is exited and put away immediately to the folding section [6].

Procedure for the color registration control operation Transferring the color registration mark The color registration mark ” ” of each black, cyan, magenta, and yellow colors are transferred on the transfer belt in that order forming two marks per line, one each on the left and right sides on the belt. During the initial phase, the wire is tightened and the wire deelop [4] comes to the horizontal position but the bundle press stage [5] doesn’t move up. Main tray paper detection A specified period of time after the main tray paper exit sensor PS18 turns ON, M11 starts up to bring down the main tray until the main tray upper limit sensor PS20 turns OFF, and then inoe it up again until PS20 turns After the paper is exited, PS20 maintains the distance between the upper surface of the paper exited in the main Heat storage accumulated in paper stacked during continuous printing may cause tacking sheets of paper sticking hard each other by toner when toner that has been fused is re-fused and adheres.

  ASUS P5E-VM AUDIO DRIVER

Enter text from picture: In the case of other than the Z-fold, a specified period of time after the 1st folding conveyance sensor PS51 turns ON, SD15 turns ON to convey the paper to the 2nd folding after the 1st folding.

ineo+ 3100P

A risk of product trouble, injury, and fire exists. When PS6 is turned off by loading paper that has been exited, the stacker tray up down motor M1 turns on to lower the stacker tray down to the position at which PS6 turns on. All brand and inwo names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

The laser light can enter your eye, leading to a risk of loss of eyesight. Product name In this manual, each of the products is described as follows: